Commercial Catalog

Adrian Steel has the storage products you need, with a nationwide distributor network for professional installation. This catalog will help you set up your work van with the equipment you need to get the job done. Start with a partition to keep your cargo in the cargo area. Choose the shelving and modules for the curb and street side that fit your business needs.

Or, choose a pre-designed trade package to start from. Add the accessories you need to make your van more organized. Carry ladders or cargo on your roof? Check out the variety of ladder and utility racks available. The options are many, so if you don’t know where to start contact your local Adrian Steel distributor for the expert advice you are looking for.

Adrian Steel has the storage products you need, with a nationwide distributor network for professional installation. This catalog will help you set up your work van with the equipment you need to get the job done. Start with a partition to keep your cargo in the cargo area. Choose the shelving and modules for the curb and street side that fit your business needs.

Or, choose a pre-designed trade package to start from. Add the accessories you need to make your van more organized. Carry ladders or cargo on your roof? Check out the variety of ladder and utility racks available. The options are many, so if you don’t know where to start contact your local Adrian Steel distributor for the expert advice you are looking for.

PHVAC Techs need to work in nearly every condition -- on rooftops, in basements and everywhere in-between. We’re designing the perfect upfit packages for your job that include shelving, bins, partitions, and other useful items. These packages will help you be more organized and efficient at your job.

Adrian Steel has the storage products you need, with a nationwide distributor network for professional installation. This catalog will help you set up your work van with the equipment you need to get the job done. Start with a partition to keep your cargo in the cargo area. Choose the shelving and modules for the curb and street side that fit your business needs. Or, choose a pre-designed trade package to start from.

Add the accessories you need to make your van more organized. Carry ladders or cargo on your roof? Check out the variety of ladder and utility racks available. The options are many, so if you don’t know where to start contact your local Adrian Steel distributor for the expert advice you are looking for.

Our aluminum service truck beds offer the most innovative design and superior construction.

Tested in the harshest lab environments, automotive proving grounds and by customers like you, our Aluminum Service Bodies are built to perform. Additionally, military-grade aluminum and structural adhesives that ensure maximum strength and longevity for your work truck.

What does this mean for you? The corrosion resistance of aluminum, an impactful increase in payload and a truck bed as durable as steel. When it comes to Knapheide, lightweight doesn’t mean light duty.

Love the organization capabilities in a utility van, but require a truck chassis for more cab space or four-wheel drive? We’ve designed KUVcc Utility Truck Bodies just for you.

You get all the same great benefits of a KUV, but in a package that’s compatible with a truck cab chassis. With more than enough secure compartments and cargo area storage, the KUVcc can handle all of your tools, equipment and parts while keeping them separated and organized. The KUVcc features solid steel construction so you know you will get years of durable service out of this enclosed utility body.

Productivity and efficiency is vital to your success, so choose a Knapheide KUVcc to add a boost to your bottom line.

With a rugged steel construction and external storage for your tools and equipment, the Service Body is a key component in your day-to-day productivity.

The external compartments offer protection from outside elements and allow technicians to access their equipment without having to climb into the truck bed.

Staying organized both on and between job sites is important. Get maximum efficiency with a Knapheide Service Body.

Say goodbye to crawling around in the back of your cargo van endlessly searching for tools, parts and equipment. The KUV creates optimized organization for the technician, dividing the storage space into manageable compartments that are externally accessible from either side of the body.

The technician pulls up to the jobsite, exits the cab and immediately has quick access to the tools and parts they need without having to crawl into the cargo area. Dedicated conduit chutes enable the technician to store longer items without cluttering the floor of the oversized cargo area.

Knapheide's KUV is constructed of rugged galvanneal steel so the technician can have confidence it will provide years of reliable service. More contractors and technicians utilizing an enclosed utility body as their work vehicle choose a Knapheide KUV. If you spend more time searching for tools and equipment, invest in a KUV and get more billable hours out of your day.

Heavy-Hauler Junior flatbed truck bodies are designed with versatility in mind to meet various vocational needs.

Knapheide's Heavy-Hauler Junior Platform Body is equipped with external rub rails, integrated tie down points and stake pockets, along with a heavy-duty bulkhead and robust flooring options. Add steel stake sides to a Heavy-Hauler Junior Platform Body to transition into a dedicated Stake Body, or choose a hoist for dumping applications. The Heavy-Hauler Junior Platform Body is designed to be multi-faceted in order to suit a wide variety of vocations.

The Heavy-Hauler Junior offers all the features you need to tackle tough jobs without breaking your budget.

PGNB Gooseneck Bodies from Knapheide come loaded with all the same great standard features found in PGNA models (integrated gooseneck and receiver hitch systems, internal stake pockets and punched bulkhead) plus integrated stop, tail, turn and backup lights in both the rear skirt and bulkhead and side rub rails for additional functionality and convenience.

Choose models for either single or dual rear wheel chassis, along with 8', 9' and 11' body lengths. Regardless if you're hauling a horse trailer or hay bales, PGNB Gooseneck Bodies are well equipped for the task at hand.

PGNC Gooseneck Bodies from Knapheide have distinct side-skirt styling with integrated front and rear toolboxes. The sleek yet functional design provides storage for tools, chains, tie-down straps and more.

Unlike the competition, Knapheide fully immerses all Gooseneck Bodies, including the PGNC, in an exclusive E-Coat prime paint system for the industry's best rust and corrosion protection. When you need a Gooseneck Body with proven performance, turn to the Knapheide PGNC Gooseneck Body.

Knapheide PGND Gooseneck Bodies are the top of the line. You won't find a more feature-packed and deluxe model in the industry. PGND Gooseneck Bodies feature superior and innovative solid steel construction so you have confidence it will withstand your jobsite abuse.

From the ample compartment storage to the contoured bulkhead to the all LED lights, the PGND has everything you need in a Gooseneck Body and more. The reliable under the floor gooseneck hitch system can haul even your heaviest gooseneck trailer loads.

Need a versatile Platform Body that can haul just about anything? Knapheide's Value-Master X Platform Body features solid steel construction and is available in many different lengths and widths to fit a variety of chassis applications.

Choose wood, steel or treadplate flooring and pick from numerous side accessories including stake sides, solid sides or refuse sides to customize for your hauling job. Pair this flatbed up with a hoist to add dumping functionality.

Regardless of your needs, the Value-Master X Platform Body from Knapheide has you covered.

Heavy-Hauler Junior flatbed truck bodies are designed with versatility in mind to meet various vocational needs.

Knapheide's Heavy-Hauler Junior Platform Body is equipped with external rub rails, integrated tie down points and stake pockets, along with a heavy-duty bulkhead and robust flooring options. Add steel stake sides to a Heavy-Hauler Junior Platform Body to transition into a dedicated Stake Body, or choose a hoist for dumping applications. The Heavy-Hauler Junior Platform Body is designed to be multi-faceted in order to suit a wide variety of vocations.

The Heavy-Hauler Junior offers all the features you need to tackle tough jobs without breaking your budget.

Knapheide’s Value-Master X Platform Body features solid steel construction and is available in many different lengths and widths to fit a variety of chassis applications. Choose wood, steel or treadplate flooring and pick from numerous side accessories including stake sides, solid sides or refuse sides to customize for your hauling job. Pair this flatbed up with a hoist to add dumping functionality.

Regardless of your needs, the Value-Master X Platform Body from Knapheide has you covered.

Knapheide’s Drop Side Dump Body is the premier light duty dump bodies for class three to five chassis. Constructed of high-strength steel for unmatched durability and featuring a crossmemberless understructure for low maintenance and rust prevention, many industries including landscaping, lawn maintenance, construction and municipalities have come to rely on the Knapheide Drop Side Dump Body to safely and efficiently haul and dump bulk materials.

Additionally, all Knapheide Dump Bodies are fully immersed in Knapheide’s electrodeposition prime paint system to ensure corrosion resistance and reliable service. The next time you’re in the market for a light duty dump body, look no further than Knapheide’s Drop Side Dump Body.

Our light-duty dump truck bodies aren’t built “light duty” at all. Knapheide Fixed Side Dump Bodies feature double panel, high-strength steel construction on the sides and tailgate. In addition, choose from a seven gauge or 10 gauge HRCQ steel floor.

Choose from two different styles of understructure, either stacked crossmember or crossmemberless design, depending upon your preference. Utilize the double-acting sub frame hoist for effortless dumping and bulk material spreading applications. Numerous options including underbody toolboxes and packs for secure storage, quarter or full cab shields for protection, manual or electric tarps for retaining material and many others are available to increase the functionality and productivity of your next dump body.

Choose the proven Knapheide name for your next dump body purchase.

The Knapheide Manufacturing Company brings the next generation of van storage solutions to today's mobile contractors. With a comprehensive lineup of van equipment, including shelving, boxes and van partitions, Knapheide Van Equipment offers the rugged equipment, van packages and vocational packages to keep you working

Used in a variety of industries, a box body provides many benefits for your cargo hauling needs. When keeping your cargo out of the elements and safely secured when not in transit, box bodies are an ideal choice.

Knapheide Box Bodies come with standard features to help you get the job done. With a full size rear roll-up door, cargo can be easily accessed.

Box bodies are available with .040” aluminum sidewalls or 0.5” FRP sidewalls. Aluminum sidewalls offer exposed Z posts with interior options for maximum cargo control. FRP provides a smooth outer sidewall perfect for graphic artwork, with increased interior space void of interior framing.

Standard Features:
• Floors are 2”x8” pine shiplap (laminated hardwood for bodies 18’ and longer)
• Floors include 12-gauge steel side rail band structure
• Rear threshold is 10-gauge steel with built-in drain groove to prevent water from entering cargo area
• Corner posts are 12-gauge steel with 14-gauge reinforcement, adding extra durability
• Standard rear roll-up door comprised of .25” composite, which features 10% lighter weight than standard wood doors with zero rot
• 4” ICC bumper
• .040” aluminum side walls
• Grab handles
• LED integrated S/T/T and B/U lights
• Cast aluminum front corners
• Extruded aluminum roof edging to prevent water intrusion and provide durability
• Structural long sills with structural cross members:
• On 16” center for bodies 17’ and shorter
• On 12” center for bodies over 17’
• Rear steel header reinforced with steel inner brace supports
• One interior LED dome light (two lights in bodies 18’ and longer)
• Fiber reinforced plastic (FRP) front wall

Knapheide Box Bodies come with standard features to help you get the job done. With a full size rear roll-up door, cargo can be easily accessed. Choose a Knapheide Box Truck (KBT) or Knapheide Box Van (KBV) to fit your needs.

Our box bodies are available with .040” aluminum sidewalls or 0.5” FRP sidewalls. Aluminum sidewalls offer exposed Z posts with interior options for maximum cargo control. FRP provides a smooth outer sidewall perfect for graphic artwork, with increased interior space void of interior framing

Rugged Knapheide Mechanics Trucks have been utilized in many different industries including heavy construction, railroads, municipalities, mining, agriculture and equipment rental. Knapheide Mechanics Trucks provide reliability, productivity and safety on the jobsite. Knapheide Mechanics Trucks are complete turnkey packages mechanics need and come to expect in a service truck.

All Mechanics Trucks from Knapheide feature a crane to perform the lifting, heavy duty mechanics drawers for organized tool storage and ample and secure storage within the side compartments. Choose from a variety of crane body lengths, electric or hydraulic cranes, compressors, welders, generators, lube packages and auxiliary lighting.

Contractor truck bodies combine our most popular flatbed, the Value-Master X, and packages it up with options and accessories that contractors commonly desire to make their job easier.

Above and under-body toolboxes provide the contractor with easily accessible and secure tool storage. An overhead material rack accommodates for convenient storage for up to 1,500 pounds of longer materials. Side and rear stakes close off the cargo area so oversized equipment or materials won’t fall out during transport.

Select the Knapheide Contractor Body to get the most out of your work day.

Knapheide’s landscape truck bed isn’t your normal Landscaper Body.

It includes optimized standard features to take your landscaping or lawn care operation to a new level. Need the ability to transfer, dump and distribute bulk materials like mulch, dirt, rock and more? The integrated dump hoist provides effortless operation while an optional metering gate enables the landscaper to easily control filling wheelbarrows. Load and haul palletized materials? A 50? side access swing out door accommodates for quick forklift loading. Add additional functionality with an optional storage pack or underbody toolbox.

If you want to upgrade your landscaping vehicle, check out the Knapheide Landscaper Body.

Knapheide Crane Bodies are built with an isolated crane compartment and understructure reinforcements in order to withstand the torsional forces applied to a body during lifting operations. Knapheide's comprehensive line-up of Crane Bodies includes models from light-duty trucks, up to extreme heavy-duty applications. From construction and mining to agriculture and equipment repair, Knapheide Crane Bodies have continually proved their worth time and time again. When your job requires some heavy lifting, call on a Knapheide Crane Body to help you get the job done.

A reputation for designing and building the best box truck bodies in the industry means top OEM's are happy to work with Morgan to deliver the truck you need — FAST. Morgan's ability to gain immediate access to top-of-the-line chassis and components, directly benefits dry freight haulers who don't have time for delays. Fast turnaround means faster return on your investment!

Quick turnaround is not devoid of options. Morgan builds a series of exceptional features into each of six pre-configured models. With lengths ranging from 12 to 26 feet, heights from 97 to 103 inches, and widths from 96 to 102 inches, it's easy to choose a body that meets your size specifications.

When it comes to features, Morgan provides strength and durability that supersedes the need for variety. With Fastrak, there's no need to ask for 1-1/8" laminated hardwood flooring, aerodynamic design, Poly-Tuff corner caps, a built-in rain channel, anti-snag roof-bows and built-in safety features. They're all standard Fastrak features; and further proof that Morgan knows what it takes to build the best bodies in the business.

• SUBFRAME - 3" I-beam Crossmembers On 12" Centers With 4" Longrail , Mylar Tape Is Applied Between All Steel Subframe Components And Extruded Aluminum Lower Bottom Rails To Prevent Corrosion
• FLOOR - 1- 1/8” Laminated Hardwood Fastened To Subframe With 2 Countersunk Screws Per Floor Board Per Cross Member In A Staggered Pattern. Floor Boards Are Ship Lapped And Preundercoated For Protection From Elements.
• THRESHOLD - Steel Galvanized Angle Flush To Rear
• REAR DOOR - Overhead Roll-up Door
• REAR FRAME - Galvannealed Steel -painted Imron White, Includes Built-in Header Design, Clearance Light Protector And Rain Deflector, Curbside And Roadside Grab-handles
• ROOF - .032” One-piece Aluminum Sheet With Anti-snag Roof Bows On 24” Centers With Crowned Roof Design Which Prevents Water/Ice Pooling
• SKINS - .040“ Aluminum, Pre-painted White
• SIDE WALL - Extruded Aluminum Top And Bottom Rails With 1-3/8” Deep Galvanized Steel Z-shaped Vertical Posts Installed On 16” Centers
• FRONT END - Aerodynamic Aluminum Radii and Morgan’s Patented Poly-tuff Corner Caps
• BUMPER - 5” Structural Bumper With Pooched Surface And Closure Plate
• INTERIOR LIGHTING - (1) Domelight With Indicator Switch Mounted In Cab Dash
• EXTERIOR LIGHTING - Led Sealed Clearance Lights, Per Fmvss-108 Installed In Front Corner Caps, Side Top Rails And Five Across Rear Header.
• MOUNTING - Full Mount-u Bolt
• MUDFLAPS - Morgan 24" X 36" Black

Landscapers, maintenance crews, contractors, material suppliers and tradesmen of all kinds know there's no room in the schedule to worry about durability or to work around the limits of your truck. Morgan's LandscaperPro dump truck body is engineered to provide superior strength regardless of the body size. Steel I-beam construction, heavy-duty 10-gauge steel flooring, steel rub-rails and LED lighting are just a few of the standard features that result in a body that's hard to beat!

Make work easier with our integrated double acting hydraulic cylinder scissor hoist, forklift-friendly side door access, unencumbered bed access, and underbody tool storage options to maximize bed space. When your work demands strength, durability, and versatility you can depend on, you know you can depend on Morgan!

• Body Construction of A-60 Galvanized Steel Locks Out Rust and Corrosion
• Single Doors on Front Compartment for Enhanced Resistance to Water and Dust
• Weather Stripping for Dust and Water Resistant Compartment Interiors
• Rain Gutters Above all Doors
• Gas Springs on all Vertical Doors and Chain Stops on Horizontal Doors
• All Compartment Doors are Double Paneled
• Trademarked Recessed Stainless Steel Door Pockets with Internal Fasteners
• Top Lids Have (2) Gas Shocks and (2) Rotary Latches Each Mounted on Lid Ends
• Bright Tread Aluminum Diamond Plate Overlays on Top Lids
• Bright Tread Aluminum Front Gravel Guards and Splash Guards
• Lock-in-place Shelving, Adjustable on 2” Centers
• 13.5” High Self-leveling Tailgate with Shear Resistant Machined Hinges and Protective Stainless Steel Cap
• 12 Gauge Diamond Plate Floor on 10 Gauge Crossmembers
• Composite Fender Flares
• Zinc-plated Hinge Rods with Hinge Blocks
• Lighting Package Installed on Bumper Kick-plate
• 8” Rear Step Bumper
• Removable Trays
• Tie Downs in Bed Area
• Fortress 5-Point Locking System with Zinc Plated Lock Rods
• 1900 Emulsion Undercoating

Touting cargo space matched only by a flatbed, boxes above and below deck, portable trays in the flip-top compartments of the top boxes, and a heavy-duty over-cab ladder rack that is forklift loadable; the contractor body sets the bar high when it comes to versatility. Rain gutters above and weather stripping inside all doors ensure tools and equipment stay protected from the elements. Fold-down gates make it easy to load the bed area without being inconvenienced with loose gates.

The ladder rack comes with Snap-Loc standard on the side rails and heavy-duty rope hooks on rack legs, while the top boxes have D-ring tie-downs on the rear, providing multiple tie-down points to secure loads in the bed and on the rack. With space to secure welders, compressors, generators, or lawn equipment with room to spare; the contractor body is perfect for any number of vocations.

Standard Features

• 42” High, 50/50 punched-steel headboard
• 7” High-profile 10 GA. Side rails w/ Internal stake pockets
• Recessed fuel Pocket
• 4” 11 GA. Cross-members on 16” centers
• Rope Hooks on Cross-members before & aft of rear wheels
• Mud Flaps w/ Anti-sail brackets
• Heavy-Duty Dock bumper
• Powder-coated frame

Landscape Dump Body Standard Equipment
• 42” high Solid Plywood Gates with Wood Uprights on Landscape Dump Body
• Double-acting Hoist raises and lowers the Dump Bed
• Steel Upright Posts and Framing on Rear Hinged Gates
• Heavy Duty Drop Rod Lock on Rear Gates
• Rear Hinged Gates allow easy access to bed area
• Expanded Metal Cab Shield
• Royal Mud flaps

With a 3' Work platform in place of the rear compartment, the Royal combo service body transforms a regular service body into a mobile work station. With removable gates and a variety of options, this body is perfect for the craftsmen who need ample storage and workspace. Rain gutters above and weather stripping inside all doors ensure tools and equipment stay protected from the elements while Ignition key coded, Fortress 5-point locking compartments and internal master lock as an option, provides unprecedented security.

Portable trays in top lids and ergonomic D-shaped handles are highlights of a body engineered with productivity and ease of use in mind. With a heavy-duty, forklift loadable over-cab ladder rack, bamboo slats with stainless-steel posts for the rear platform, and heavy-duty dock bumper as standard features; the Royal combo service body comes equipped to tackle just about any demands.

Standard Features:
• A-60 galvannealed steel body construction locks out rust
• Fortress 5-Point Locking System with zinc plated lock rods
• Smooth body panels for company graphics
• Rear Barn Doors
• Rear access door to conduit compartment
• Internal Master Lock System
• Removable, high impact composite trays with dividers on inside shelves
• Rain gutters above all doors
• Automotive-style Neoprene weather stripping for dust and water resistant compartment interiors
• Gas springs on all vertical doors and chain stops on horizontal doors
• All compartment doors are double-paneled
• Composite fender flares
• Trademarked recessed stainless steel door pockets with internal fasteners
• Tough Bright Tread aluminum front gravel guards and splash guards
• Lock-in-place shelving, adjustable on 2” centers
• 12 gauge diamond plate floor on 10 gauge crossmembers
• Full width 11.75” rear step Grip Strut bumper
• 1900 emulsion undercoating
• Solid Bulkhead
• Zinc-plated hinge rods with hinge blocks
• 4 tie downs in bed area
• 3-year / 36,000 mile limited warranty

The last things you need are surprises and expensive add-ons. You have no patience for nickel-and-diming, just like your customers. So Royal Truck Body gives you more standard features than any other service body builder. The kind of commonsense value that respects your hard work and tight margins.

The versatile Royal Stake Bed Body is tough and built with 11 gauge steel cross members on 16” centers for added strength. Easily lift and remove the individual Apitong® panels for loading and unloading. Apitong® has been the traditional wood of choice for flatbed truck flooring where product weight, durability, strength and value are the major concerns.

Standard Stake Bed Features:
• 42” High, 50/50 punched-steel headboard
• 7” High-profile 10 GA. Side rails w/ Internal stake pockets
• Recessed fuel Pocket
• 4” 11 GA. Cross-members on 16” centers
• Three self-tapping screws on wood at each cross member
• Rope Hooks on Cross-members before & aft of rear wheels
• Heavy-Duty dock bumper
• Powder-coated frame
• Apitong® hardwood tongue and groove floor
• Under-bed rope hooks
• 50/50 bulkhead with 14 gauge galvanealed perforated steel top section and solid steel bottom
• Legal light package and reflectors
• Frame construction is 2” x 3” steel tubing
• Mud flaps with Anti-Sail Brackets
• 42” high solid plywood gates with hardwood uprights and grab handles
• 3 year/36,000 mile limited warranty

Supreme sets the benchmark for cutaway truck bodies. Featuring a cab-access door, flat floor, and tight turning radius, our tough, sturdy Iner-City cutaway is ideal for shorter, multi-delivery routes, effortlessly carrying your cargo. Versatile and rugged, the Iner-City helps you get through the workday with dependable efficiency.

The Spartan Cargo is a cutaway that’s an excellent solution for multi-stop deliveries in cities and other tight places. The low-profile design and exceptional maneuverability make for a smooth ride. Practical and comfortable, with room to stand up straight inside, the Spartan Cargo is all business.

Built to save time, the Spartan Service truck body delivers convenience. You’ll find compartments and custom shelving to keep you organized, and a large, bright work space that provides shelter from the elements while at the worksite. You can even work standing up inside, and the low-profile design allows easy access to your cargo and equipment.

The PL model is a platform body with an edge, featuring the strongest, most durable materials on the market with best-in-class features to get the job done.

Specs & Features
• Lengths: 12', 14', 16', 18'
• Headache Rack: Formed Bulkhead with Punched Grill
• Deck: 3/8" Treadplate
• Frame Rails: 4" Structural Channel Steel
• Crossmembers: 3" Channel Steel 18" OC
• BP Hitch: ICC Optional
• Side Rails: 3/8” x 2” Side Rails with Stake Pockets
• Marker Lighting: Bullet DOT Approved LED
• Toolbox: Optional Underbody

Built to work. Built to Last.

Tough enough to haul the big loads, the popular RD models are expertly designed, professional-grade workhorses that are sized to fit almost any unit.

• Lengths 84", 8'6", 9'4", 11'4"
• Headache Rack Steel Tube
• Deck 1/8" Treadplate
• Frame Rails 4" Structural Channel Steel
• Crossmembers 3" x 3/16" Channel
• Rear Skirt Solid One Piece with Tapered Corners
• GN Hitch 30K B&W Hitch with Welded Ball
• BP Hitch 18,500 lb. B&W Hitch with Receiver Tube
• Side Rails 3/8” x 2” Side Rails with Stake Pockets
• Fuel Fill Angled
• 12V Trailer Plug 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear
• Rear Lighting Clear LED Oval
• Light Box (Read Skirt) Steel
• Marker Lighting Bullet DOT Approved LED
• Toolbox Optional Underbody
• Toolbox Handle N/A
• Fenders N/A
• Side Steps N/A
• Tiedowns N/A

Specs & Features:
• Lengths: 84", 8'6", 9'4", 11'4"
• Headache Rack: Steel Tube
• Deck: 1/8" Treadplate
• Frame Rails: 4" Structural Channel Steel
• Crossmembers: 3" x 3/16" Channel
• Rear Skirt: Solid One Piece with Tapered Corners
• GN Hitch: 30K B&W Hitch with Welded Ball
• BP Hitch: 18,500 lb. B&W Hitch with Receiver Tube
• Side Rails: 3/8” x 2” Side Rails with Stake Pockets
• Fuel Fill: Angled
• 12V Trailer Plug: 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear
• Rear Lighting: Clear LED Oval
• Light Box (Rear Skirt): Steel
• Marker Lighting: Bullet DOT Approved LED
• Toolbox: (4) Standard Integrated
• Toolbox Handle: T Handle Compression
• Fenders: Steel Radius
• Sidesteps: In front of and behind fender

CM’s welded aluminum service body maximizes payload and resists the corrosion that most commercial customers want to prevent in their work trucks. Our wide variety of options allows our fleet and commercial customers to have a body that fits their needs.

Specs & Features:
• Lengths: 84", 8’6", 9’4", 11’4"
• Headache Rack: Steel Tube
• Deck: 1/8" Smooth Steel
• Frame Rails: 4" Structural Channel Steel
• Crossmembers: 3" Structural 3/16"
• Rear Skirt: Solid One Piece with Rear Step
• GN Hitch: 30K B&W Hitch with Welded Ball
• BP Hitch: 18,500 lb. B&W Hitch with Receiver Tube
• Side Rails: Raised Side Rail with Aluminum Cap
• Fuel Fill: Angled (Cast Aluminum)
• 12V Trailer Plug: 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear
• Rear Lighting: Clear LED Oval with Chrome Housing
• Light Box (Rear Skirt): Cast Aluminum
• Marker Lighting: Bullet DOT Approved LED
• Toolbox: (4) Standard Integrated
• Toolbox Handle: Chrome T Handle Compression
• Fenders: Stainless Radius
• Sidesteps: In front of and behind fender
• Tiedowns: (4) 18" Airline Track Tiedowns, (4) Attachment Rings

Specs & Features
• Lengths: 84", 8'6", 9'4", 11'4"
• Headache Rack: Steel Tube
• Deck: 1/8" Treadplate
• Frame Rails: 4" Structural Channel Steel
• Crossmembers: 3" x 3/16" Channel
• Rear Skirt: Solid One Piece with Rear Step
• GN Hitch: 30K B&W Hitch with Welded Ball
• BP Hitch: 18,500 lb. B&W Hitch with Receiver Tube
• Fuel Fill: Angled
• Trailer Plug: 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear
• Rear Lightning: Clear LED Oval
• Light Box (Rear Skirt): Steel
• Marker Lighting: Bullet DOT Approved LED
• Toolbox: Utility Box in Front, Top-Open 3/4 Length Shovel Box; Low-Profile Chain Box in rear
• Toolbox Handle: Chrome T Handle Compression
• Fenders: Steel Radius
• Sidesteps: In front of and behind fender
• Tiedowns: (4) 18" Airline Track Tiedowns, (4) Attachment Rings

From the glistening body finish to the Master Lock System designed to protect the tools of your livelihood, TradeMaster defines quality and value. If you are the best at what you do, why not drive the best? Harbor: Driven by the Best!

• Stainless Steel self-opening pop-top lids w/ body length compartment bins & 4" dividers
• Push Button locking system with red band locking indicator
• Modern gas shocks on each side opening door to keep them open during loading and unloading
• 8" deep recessed bumper for sure footing when entering bed
• Armless and self supporting tailgate work table
• Adjustable, but lockable, shelving system
• Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
• Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.

Nearly half a century of cutting edge engineering has created this Standard Contractor model. But there is nothing standard about it! Our flawless well integrated overall design now comes with optional diamond plate steel or extruded aluminum decks and rear fold-down gates. It’s powder-coated head to toe. WOW!

Standard Features:
• Side loader rack with extra heavy duty 4x2 longitudinal bars that drop down 4-inches, meaning you can easily carry ladders, forms, or scaffolding.
• Top deck mounted boxes, addressing a wide variety of storage needs.
• Gates that fold down in the rear that creates both a work platform and an ease of loading and unloading of equipment into the bed area.
• Dividable deck area between the space between the boxes, for heavy machinery such as compressors or welders, and the rear platform, for bags of concrete or a wheel barrel.
• Stainless steel rear apron mounted between the dock bumper uprights , hiding the unsightly under-deck clutter.

The General Service (GS) Package adds to the capability of the Plus packaging by adding an additional 4-drawer pack. Why not add yet 2 more drawer packs to improve the utility of storage for small components? Or add shelves to take advantage of the extra height? This is Harbor modularity at its best!

Plumbing Heating and Ventilation service technicians need to carry bottles of Nitro, CO2 or Brazing torch gases to pressure test systems, purge a system, blow out coils, or solder or repair lines. The PHVAC package is designed to satisfy your need with a 3-tank holder mounted off the rear shelf panel, four (4) drawer packs, and a lockable storage compartment for valuable components. How about adding a drop-down rack for your different size ladders that help you get to that system? Keep your tanks at 40 cu.ft. or less if you have to carry them up the ladder!

Standard Features:
• (2) Shelving Units on the Driver's Side with Drop In Dividers on the Second Shelf from the Top
• (1) Shelving Unit on the Passenger's Side with Drop In Dividers on the Second Shelf from the Top
• (2) 2-Drawer Pack on the Driver's Side
• (2) 3-Drawer Pack on the Passenger's Side
• (1) Hanger Hooks
• (1) Drop Down Door, creating a lockable compartment on the Driver's Side
• (1) Tank Holder for (3) 30 lb. tanks
• Partition

The WorkMaster secures the tools of your trade unlike any other enclosed service body. Constructed with steel, built like a vault, the “walk-in” WorkMaster is designed for heavier-duty cutaway vans…and we have been known to mount them on a chassis or two. The WorkMaster is constructed in different lengths and heights to meet your every tool, material storage, and interior height (up to 6’3?) requirement. Need to carry more than your typical van? This is your truck!

• Tightest security system in town, featuring double-bit keys and a Master Lock internal locking system
• Modern gas shocks on each side opening door to keep them open during loading and unloading
• Rear side access door for storage of conduit or other long (10-ft.) materials
• 12" step bumper and side-wall grab handles for ease of entrance into the bed
• Interior ladder storage on hooks mounted along inside shelf Weights up to 300 lbs. lighter than competing brands using FRP
• Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
• Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.

MASTERACK®’s strong and durable steel interiors are designed to handle the toughest applications. These high quality, heavy duty interiors have been the number one choice for many commercial fleets for more than 45 years. Cost effective and reliable, a MASTERACK® steel package will help keep fleets organized on the road for years to come.

Built for the value minded operator whose focus is a well-constructed box with functionality as the main aspect. Low floor entry height and available side and rear door configurations, make Cargoport popular for vocations that include multi-stop deliveries. Cargoport’s flexibility allows the operator to customize this unit if needed creating a vehicle that’s tailored to your specific vocation.

With quality and flexibility as a leading consideration, Rockport is pushing the bar higher with industry leading innovations built into every Rockport body. Features include Aluminum or FRP construction, Aluminum or Translucent Roofing; various flooring options include Laminated Hardwood with interlocking joints for maximum strength, Extruded Aluminum, Marine Grade Plywood and Steel or Aluminum Treadplate Overlay.

Many other available options allow you to customize The Rock to best suit the needs of your specific application for many years of reliable service.

A true workshop on wheels, the ergonomically designed Workport provides both an exceptional and functional way to service your customers. A stand up interior height, heavy duty door hinges and integrated rear access ladders are just a few aspects customers favor.

The exterior compartments provide ease of access with the convenience of available power locks to keep valuable cargo secure at the push of a button. The flexible Workport can be tailored to your specific needs with available shelving, lighting, accessibility, cargo control and many other features to make this product truly unique to your line of work.

Designed for value, the LE includes simple construction with base equipment and limited options offering an alternative to meet or exceed your lead-time and budget requirements. Standard features include aluminum sidewalls, aluminum roof and painted 1 1/8” plywood floor with interlocking joints for maximum strength.

Standard Features:
• Aerodynamic Aluminum Top Radius
• Extruded Aluminum Front Corner Posts
• High Impact Resistant Front Corner Caps
• FRP Front Wall
• FMVSS Lights and Reflectors
• Recessed LED Clearance Lights
• LED Cargo Dome Lamp with Switch (3-Way on Cutaway Only) - 17’ or Longer get 2 Dome Lamps
• LED Tail Lights on Rear Vertical Posts (Availability on Select Models)
• Seamless Aluminum Sheet with Anti-Snag Interior Roof Bows Located on 24” Centers
• Coated Steel Rear Structure with 12-Gauge Sides and Header Coated Black, 10-Gauge Footer
• Flush Rear Sill with Drain Trough
• ICC Bumper, Steel
• Roll-Up Rear Door, Full Width, Composite
• Interior Handle Release
• .040 Pre-Painted White Aluminum Sidewalls
• Solid Bucked Rivets on Overlapping Joints and Structural Bonding Intermediate Posts
• 12” Grab Handles at Rear Door
• Interior Cargo Floor Length is True to Body Length
• 5” Long Sills with 3” Formed Steel Crossmembers on 16” Centers
• 1 1/8” Plywood, Painted, Flat Floor
• Mud Flaps
• Undercoating